Just had to do something to those plain chrome tunners I love the 510s so picked up a set of Mini gold with black buttons.
I installed them yesterday it was an easy swap out, did have to go buy a 1/16" drill bit to make sure the screws would thread good. I knew the gold and black would look nice against the maple.
Tunners from Luthiers Mercantile Int. inc, lmii part # GGM6GSBMC
So at same time I work the tunners I got carried away and fabricated a new nut, I had a used right hand 1 3/4" standard Taylor nut laying around , so decided to try it . it's a very close fit but it does make it . You have to sand down of each side of the nut to make it fit , and after a try out, I had to pull the low E string slot a tad inward,(pics before the adjustment) Perfect now!. Im happy with the job I did. Kept the standard one to swap back some day maybe.
Had a extra bone saddle laying around also and thought I'd try it out . The result in the lower nut height and lower saddle high.
subtracted some of the minis boom and volume , but not by much, it plays easyer now and thats what i was after.
Took before and after pics of the head stock. I recomend these tunners, there beautiful!