Author Topic: Taylor 2016 712e 12-fret Prototype  (Read 1458 times)

jkm

  • Jr. Member
  • **
  • Posts: 60
Taylor 2016 712e 12-fret Prototype
« on: October 18, 2017, 06:57:57 AM »
PRICE DROP
$2500 (was $2700)

Taylor 712e 12-fret Prototype Model
This is the guitar the new 700 series were based on

Lutz Spruce top
Solid East Indian Rosewood back and sides
Koa binding
Douglas Fir rosette and edge trim
12 Fret
1 3/4" nut
24 7/8" scale length
Performance Bracing with Relief Rout
Weathered Brown pickguard
Tusq Nut / Micarta Saddle
Hardshell case included
Pale green abalone "Reflections" fretboard inlay
Taylor ES2 electronic preamp

There is one very small impression in the binding on the back near the lower bout.  If you are not looking for it, it is nearly invisible.  See the photo of the back.  Otherwise the guitar is always maintained with appropriate humidity and is very well cared for.
« Last Edit: January 31, 2018, 07:29:50 AM by jkm »

StrummingMadMan

  • Sr. Member
  • ****
  • Posts: 276
Re: Taylor 2016 712e 12-fret Prototype
« Reply #1 on: March 12, 2018, 12:28:19 PM »
Are you open to trades?
414-L2 (2003)
614ce (2015)
810e DLX (2015)
K24ce (2015)
516e-FLTD (2013)
Gibson J-15 (2016)
Larrivee L-05 (2018)
Larrivee OM-40R (2018)
Martin D-18 (1959) -my grandpa, then dad's guitar
Rockbridge SJ - German Spruce/Cocobolo (2011)

jkm

  • Jr. Member
  • **
  • Posts: 60
Re: Taylor 2016 712e 12-fret Prototype
« Reply #2 on: March 12, 2018, 10:32:39 PM »
Not interested in trading at this time.